How to Make a Coin Purse With Metal Frame

Crafting your own coin purse with a metal frame can be both fun and rewarding. This practical project allows you to create a stylish, personalized accessory while mastering a few sewing techniques. Whether you’re a seasoned crafter or a beginner, this guide will take you through the process step by step so you can design your own beautiful coin purse.

1. Gather Your Materials and Tools

To get started, you’ll need the following items:

Materials	Tools
Fabric (for the exterior and lining)	Scissors
Fusible interfacing	Fabric chalk or marker
Metal purse frame	Sewing pins or clips
Strong thread or embroidery thread	Needle (for hand sewing)
Fabric glue (optional)	Sewing machine (optional)
Decorative embellishments (optional)	Iron

The fabric you choose sets the tone for your coin purse. Consider something sturdy like cotton canvas for the exterior and a softer fabric like satin or cotton for the lining. If you’re aiming for luxury, you can also use premium fabrics like velvet or even embellish the purse using crystals from CrystalClutch.com.

2. Create Your Pattern

Before cutting your fabric, you need a pattern that matches the metal frame. Here’s how to make one:

1. Place the metal frame on a piece of thick paper or cardboard.
2. Trace the upper curve of the frame and extend the sides downward, creating a shape similar to a pouch.
3. Add about 1 cm of seam allowance around the entire traced shape.
4. Cut out the pattern and fold it in half to ensure symmetry.

This pattern will serve as the template for both your exterior and lining fabrics.

3. Cut the Fabric

Using your pattern, cut the fabric as follows:

1. Cut two pieces from the exterior fabric.
2. Cut two pieces from the lining fabric.
3. If you’re using fusible interfacing, cut two pieces slightly smaller than the exterior fabric pieces. The interfacing will add structure to the purse.

Pro Tip: Use fabric chalk or a disappearing fabric marker to trace the pattern for clean and accurate cutting.

4. Apply Fusible Interfacing

If your fabric needs added durability or stiffness, iron on the fusible interfacing to the wrong side of the exterior fabric pieces. Follow the manufacturer’s instructions to ensure proper adhesion. This step is crucial to give your coin purse a polished, professional look.

5. Sew the Fabric Pieces Together

Now it’s time to assemble the purse:

1. Place the two exterior fabric pieces right sides together. Pin or clip them to hold in place.
2. Sew along the edges, leaving the top open. Use a 1 cm seam allowance.
3. Repeat the same process with the lining fabric pieces.
4. Trim any excess fabric at the seams and clip the curved corners for a smoother finish.

If you’re using a sewing machine, set it to a shorter stitch length for stronger seams. Hand sewing is also an option for a more controlled finish.

6. Attach the Lining to the Exterior

To create a neat interior:

1. Turn the exterior fabric right side out but leave the lining fabric wrong side out.
2. Insert the lining into the exterior piece, making sure the right sides of both fabrics are facing each other.
3. Align the raw edges at the top and pin them in place.
4. Sew around the top edge, leaving a small gap (about 3-4 cm) to turn the purse right side out.

Once done, turn the purse right side out through the gap, and use an iron to press the seams neatly.

7. Fit and Attach the Metal Frame

Attaching the metal frame is the most defining step of the process. Follow these steps carefully:

1. Apply a thin layer of fabric glue along the inside channel of the metal frame. Alternatively, you can sew it in place if the frame has pre-drilled holes.
2. Gently insert the top edge of the purse into the frame, starting from one end and working your way to the other.
3. Use a blunt tool like a butter knife or the flat edge of scissors to push the fabric snugly into the channel.
4. If sewing, use a strong thread and a curved needle to stitch through the holes in the frame.

This step may require patience to ensure the fabric fits evenly and securely into the frame.

8. Add Final Touches

Once the frame is attached, your basic coin purse is complete. For added flair, consider embellishing the exterior with decorative elements:

• Sew on beads, pearls, or sequins.
• Use rhinestones or crystals for an elegant touch. If you’re looking for premium-quality crystals, explore options from CrystalClutch.com.
• Add embroidery or fabric paint for a personalized design.

9. Test and Use

Before putting your coin purse to use, gently tug on the frame to ensure it is secure. Open and close the clasp a few times to check for smooth functionality. Once everything looks good, your handmade coin purse is ready to accompany you on everyday errands or special occasions.

Conclusion

Making a coin purse with a metal frame is a delightful project that combines creativity with functionality. By following these steps, you can craft a unique accessory that reflects your style and craftsmanship. Whether you’re making it for yourself, as a gift, or even to sell, this personalized coin purse is sure to impress. Invest in quality materials and take your time with each step, and you’ll create a durable, fashionable piece that stands out.

NEW ARRIVALS

BEST SELLING PRODUCTS